-
×
45 degree Engraving Starter Kit - NC2071
2 × £158.92 -
×
90 degree Spot Chamfer - Single Set - 12mm diameter - TiAlN coated insert
1 × £78.70 -
×
V0820802- 82 degree spotting insert - TiN coated
1 × £31.48 -
×
45 Degree Engraving Kit - NC2032
1 × £167.90
-
×
N9MT11T3- 90 degree spot/chamfer insert - 'H' Geometry - DLC coated
2 × £31.48 -
×
60 degree engraving starter kit - NC2035
1 × £176.88 -
×
45 degree engraving insert-NC9031
2 × £31.48 -
×
N9MT05T1RC-0.5 mm Corner Rounding insert - DLC Coated
1 × £37.93 -
×
90 degree spot/chamfer Tool Holder - 12mm dia shank x 100 O/L
1 × £77.95 -
×
60 degree engraving insert-NC9031
1 × £31.48 -
×
60 degree - Fine Engraving insert-NC9036
2 × £44.08 -
×
90 degree Spot/Chamfer - Single Set - 16mm dia shank- TiN coated insert
1 × £78.70 -
×
90 degree spot/chamfer tool- 10mm dia x 90 mm o/length
1 × £77.95 -
×
V08212T3- 82 degree spotting - TiN coated
1 × £45.79
-
×
45 degree engraving insert-NC2032
2 × £31.48 -
×
Torx Plus - Single Set - 7IP - 0.9NM
1 × £66.21 -
×
90 degree Starter Kit-10mm Shank- TiAlN coated inserts
1 × £245.86
N9MT1704 – 90 degree Spot/Chamfer insert -TiN coated
£52.94
90 degree spotting /chamfering insert.
Max width 22mm
K20F TiN coated – 2 cutting edges
High positive geometry, fully ground cutting edge and relief angle
Universal grade for all unhardened steel and cast iron
Additional information
| Angle | |
|---|---|
| Material | Alloy Steel, Aluminium, Steel <30HRC, Titanium, Stainless steel, Steel, Cast iron, Non ferrous |
| Diameter | |
| Coating |
Related products
Spotting/Chamfering
90 degree carbide shank spot/chamfer holder – 6mm diameter x 60mm o/length
£143.92
Combined Spotting & Chamfering - For tapped holes
£77.95
Sale!
Original price was: £104.93.£78.70Current price is: £78.70.
