-
×
N9GX09 - Milling & Drilling insert - NC2032
4 × £22.21 -
×
N9MT0802-90 degree spot/chamfer insert - TiAlN coated
2 × £28.61 -
×
60 Degree engraving tool -carbide shank 100mm O/L
1 × £188.88 -
×
90 degree spot/chamfer tool-6mm dia shank
1 × £71.96 -
×
45 degree Engraving Starter Kit - NC2071
1 × £158.92 -
×
60 Degree engraving tool - carbide shank 60mm O/L
1 × £143.92
-
×
N9MT0802-90 degree spot/chamfer insert - TiN coated
2 × £28.61 -
×
Corner Rounding - Front & Back - 25mm dia. x 150mm O/L
1 × £296.82 -
×
Torx Single Set - TX09 x 2.0Nm
1 × £59.97 -
×
N9MT11T3- 90 degree spot/chamfer insert - 'H' Geometry - DLC coated
2 × £31.48 -
×
N9MT11T3 - 90 degree spot/chamfer insert - Cermet Grade
2 × £35.06 -
×
90 degree Spot Chamfer - Single Set - 12mm diameter - TiAlN coated insert
1 × £78.70 -
×
N9MT11T3 - 90 degree spot/chamfer insert - TiN coated
2 × £28.61 -
×
90 degree spot/chamfer tool c/w TiN coated insert
2 × £104.93 -
×
N9MT05T1- 90 degree spot/chamfer insert -DLC coated
2 × £28.88
45 degree engraving insert-NC2032
£31.48
Part No. V04506T1W06-NC2032
- 45° insert
- K20F grade
- TiAlN coating
- Suitable for: Steel30-50HRC, carbon steel,alloy steel and cast iron
Description
45 DEGREE ENGRAVING INSERT
The NC2032 insert gives long tool life and has a strong edge on chip groove. Minimum recommended first DOC is 0.2 mm.
Additional information
| Angle | |
|---|---|
| Grade | K20F COATED |
| Coating | |
| Material | |
| Dimensions | L 6.35, S 2.0, Re 0.2 |
| W | Wmin 0.65, Wmax 2.1 |
| T | Tmin 0.2, Tmax 2.0 |
Related products
