-
×
45 degree engraving insert-NC2032
2 × £31.48 -
×
60 degree engraving starter kit - NC2035
2 × £176.88 -
×
N9MT1704 - 90 degree Spot/Chamfer insert -TiN coated
3 × £52.94 -
×
N9MT11T3 - 90 degree spot/chamfer - 'H' Geometry - TiN coated
2 × £27.20 -
×
60 degree engraving insert-NC2032
2 × £31.48 -
×
60 degree engraving Starter Kit- NC2071
2 × £158.92 -
×
60 Degree engraving tool - carbide shank 60mm O/L
1 × £143.92 -
×
N9MT0802-90 degree spot/chamfer insert - TiN coated
2 × £28.61 -
×
45 degree engraving insert-NC9031
2 × £31.48 -
×
N9MT11T3R - 4 cutting edges - 2.5mm corner rounding insert
1 × £39.78 -
×
Torx Single Set - TX09 - 1.4Nm
1 × £59.97 -
×
90 degree spot/chamfer tool c/w TiN coated insert
1 × £104.93 -
×
N9MT11T3R - 4 cutting edges - 1mm Corner Rounding
1 × £39.78 -
×
N9MT11T3P60-NC40 60 degree spot & engraving - TiN coated
1 × £45.79 -
×
Nine9 - 45 degree Chamfer Mill - 10 dia shank
1 × £158.92 -
×
90 degree Starter Kit-10mm Shank- TiAlN coated inserts
2 × £245.86 -
×
Torx Plus - Single Set - 20IP-5.0NM
1 × £66.21 -
×
60 degree engraving starter kit - NC9031
1 × £167.90
-
×
90 degree Spot/Chamfer - Single Set - 16mm dia. tool -TiAlN coated insert
1 × £78.70 -
×
45 Degree Engraving Kit - NC2032
1 × £167.90
-
×
90 degree spot/chamfer tool-6mm dia shank
1 × £71.96 -
×
N9MT11T3 - 90 degree spot/chamfer insert - Cermet Grade
2 × £35.06 -
×
82 degree Spot/Chamfer Tool - 3/8" dia x 90mm O/L
1 × £77.95 -
×
N9MT0802-90 degree spot/chamfer insert - TiAlN coated
2 × £28.61 -
×
90 degree Starter kit -10 mm shank- TiN coated inserts
1 × £245.86 -
×
90 degree spot/chamfer tool- 10mm dia x 90 mm o/length
1 × £77.95
-
×
45 degree Engraving Starter Kit - NC2071
1 × £158.92
-
×
60 degree engraving starter kit - NC2032
1 × £167.90
-
×
60 degree - Fine Engraving insert-NC9036
2 × £44.08 -
×
N9MT0802 - 90 degree spot/chamfer insert - H geometry -DLC coated
2 × £31.48 -
×
Nine9 - 45 degree Chamfer Mill - 12m dia shank
1 × £195.63 -
×
N9MT05T1- 90 degree spot/chamfer insert -DLC coated
2 × £28.88 -
×
N9GX06 - Milling & Drilling insert - NC2032
4 × £18.07 -
×
90 degree Spot/Chamfer tool - 20mm dia x 100 O/Length
2 × £179.89 -
×
N9MT11T3RC- 2.5mm Corner Rounding Insert - TiN Coated
1 × £39.78 -
×
N9MT0802- 90 degree spot/chamfer insert -H geometry- TiN coated
2 × £27.20 -
×
N9MT080201W-NC40 90 degree Engraving Insert - TiN coated
1 × £52.94 -
×
90 degree spot/chamfer tool holder - 16mm dia x 150mm O/L
1 × £137.88
90 Degree – NC Deburring Kit
£161.41
HIGH FEED RATES
High speed deburring
Countersink from only 0.5mm diameter hole
Indexable inserts gives accurate repeatability
Holder takes both 60 & 90 degree deburring inserts.
Additional information
| Angle | |
|---|---|
| Carbide Shank | carbide shank |
| Coating | |
| Material | Acrylic, Alloy Steel, Aluminium, Brass, Copper, Plastics, Steel <30HRC, Steel 30-50HRC, Titanium, Stainless steel, Steel, Cast iron, Non ferrous, Hardened steel upto 56 HRC |
| Diameter |
Related products
Sale!
Spotting/Chamfering
90 degree Spot/Chamfer – Single Set – 16mm dia shank- TiN coated insert
Original price was: £104.93.£78.70Current price is: £78.70.
Combined Spotting & Chamfering - For tapped holes
£77.95
