-
×
45 degree engraving insert-NC2071
2 × £28.61 -
×
60 degree engraving starter kit - NC2035
1 × £176.88 -
×
V9MT0802 - 60 degree spot /chamfer - TiN coated
2 × £31.48 -
×
90 degree spot/chamfer tool-6mm dia shank
1 × £71.96 -
×
90 Degree - NC Deburring Kit
1 × £161.41 -
×
0-99616-10 10mm shank - Engraving Tool Holder
1 × £77.95 -
×
N9MT11T3- 1/4" x 20 UNC - Combined Spot & Chamfer
1 × £39.78 -
×
60 degree engraving starter kit - NC9031
1 × £167.90 -
×
60 degree engraving tool holder-steel shank-40mm O/Length
1 × £71.96 -
×
V9MT12T3 - 60 degree spot/chamfer - DLC coated
1 × £54.38 -
×
N9MT1704 - M12 X 1.75 - Combined Spot & Chamfer
1 × £66.54
-
×
N9MT1704 - 90 degree Spot/Chamfer insert -TiN coated
1 × £52.94 -
×
60 degree engraving insert-NC2035
2 × £34.35
N9MT0802- 90 degree spot/chamfer insert -H geometry- TiN coated
£27.20
Special geometry with supporting edges for use on High Speed machining.
NC40 universal grade for all steels, stainless steel & cast iron.
15% Saving – Buy 10 off
Additional information
| Angle | |
|---|---|
| Material | Alloy Steel, Steel <30HRC, Stainless steel, Steel, Cast iron |
| Diameter | |
| Coating |
Related products
Spotting/Chamfering
90 degree carbide shank spot/chamfer holder – 6mm diameter x 60mm o/length
£143.92
Sale!
Spotting/Chamfering
90 degree Spot Chamfer – Single Set – 12mm diameter – TiAlN coated insert
Original price was: £104.93.£78.70Current price is: £78.70.
Sale!
Spotting/Chamfering
90 degree Spot/Chamfer – Single Set – 16mm dia. tool -TiAlN coated insert
Original price was: £104.93.£78.70Current price is: £78.70.
